Surgical Instrument Washer Disinfector Specifications
Surgical Instrument Washer Specifications
The Washer Disinfector is a heavy-duty, high volume, single chamber, cabinet style washer designed for thorough and efficient cleaning of laboratory glassware, utensils, and miscellaneous items used in research and healthcare facilities.
Surgical Instrument Washer Disinfector size
Washer Disinfector Compartment usable space: 26” wide x 26" high x 29" deep
Disinfector Washer Overall Unit*”: 42" wide x 80" high x 36" deep Sliding Door(s) 
Disinfector Washer Disinfector Surgical Instrument Washer features
Contact us for surgical instrument detergents and enzyme surgical instrument detergents.
Customer Service: 1-509-981-1553 email:
Product Support: 1-509-747-5027 email:
Surgical Instrument Disinfector Washer load and unload configuration: (select one):
Washer Disinfector front load and unload: pass through load and unload The Washer Disinfector is provided with an unload door and an additional cycle status indicator on the unload end, allowing one-way product flow from the contaminated area to the clean area. Washer Disinfector shall be provided with a combination of rotating jet spray and direct spindle spraying for all treatment solutions.
John Temple Surgical Instrument Enzymatic Cleaners and Washer Disinfectors
Washer Disinfector safety features
Opening the Washer Disinfector load-end door (or unload-end if pass-through unit), automatically stops operation of the washer. The Washer Disinfector door(s) must be closed, alarm acknowledged, and the Cycle Start button depressed to continue operation. A Washer Disinfector Emergency Stop button is provided on the load-end control panel (and unload-end if pass-through unit). If the Washer Disinfector operations of the wash cycle are interrupted by depressing the Button, the operator must reset the button and push the “Cycle Start” button to continue operations from the beginning of the selected cycle.
Washer Disinfector computer control panel
A Washer Disinfector solid-state microcomputer control system monitors and automatically controls all process operations and functions. A Washer Disinfector twelve-cycle treatment menu may be programmed and retained to permit operating personnel to accommodate a wide variety of loads and processing requirements.  Individual cycle phase times and temperatures and other key process parameters are programmable. Each Washer Disinfector cycle may be locked by supervision to ensure process integrity. The Washer Disinfector Cycle programming may be controlled by a supervisory access code. Each cycle program may be reviewed on demand.
Washer Disinfector automatic treatment cycles
The standard Washer Disinfector treatment cycle consists of any or all of the following phases: Pre-wash, Wash, Rinse, Wash II, Rinse and Final Rinse. All cycle phases may be selected or deselected by the user. All Washer Disinfector Wash and Rinses treatments are re-circulated under pump pressure except the optional non-re-circulated rinse. The cycle, once activated, is completely automatic.
Washer Disinfector debris screens
Located in the Washer Disinfector sump, easily removable screens are provided to protect items and large debris from entering the recirculation system. Washer Disinfector WATER SAVINGS Water from the last rinse cycle may be held and utilized as the pre-wash of the next cycle.
Washer Disinfector times and temperatures
Surgical Instrument Washer Disinfector temperature guarantee:
The Washer Disinfector operator may select to guarantee the temperatures for any re-circulated phase of the cycle. If the Washer Disinfector temperature guarantee is selected, the phase will not begin timing until the re-circulated water temperature reaches the set point. If the Washer Disinfector re-circulated temperature drops below the set point during the phase, the timer will stop. Once the Washer Disinfector set point temperature is again met, the phase-timer continues from where it stopped thus assuring the set temperature during entire  treatment phase time. Contact us for: Surgical Instrument Cleaning Detergents with surgical instrument lubricants, surgical instrument cleaning detergents, with stainless steel surface conditioners, surgical instrument detergents formulated with four enzyme cleaners, enzyme detergent cleaners, and non-irritating surgical instrument detergents. The research pursuant to the efficacy of surgical instrument cleaning solutions was initiated to deactivate prions deactivating prions within the objective to prevent CJD Creutzfeldt-Jakob Disease. Contact us for product information and pricing. Click Here to go to cleaning surgical instruments prior to sterilization.

Surgical Instrument Washer Disinfector
Buy Surgical Instrument Washers that are: made in America, deliver reliable long lasting performance, built with nonproprietary and locally available washer replacement parts.
Surgical Instrument Washer Dimensions
Usable Chamber Size: 26” wide x 26" high x 29" deep
Overall Unit Size: 42" wide x 80" high x 36" deep