Washer Disinfector Specifications
Surgical Instrument Washer Specifications
The Washer Disinfector is a heavy-duty, high volume, single chamber, cabinet style washer designed for thorough and efficient cleaning of laboratory glassware, utensils, and miscellaneous items used in research and healthcare facilities.
Surgical Instrument Washer Disinfector size
Surgical Instrument Washer Compartment usable space: 26” wide x 26" high x 29" deep
Surgical Instrument Washer Overall Unit*”: 42" wide x 80" high x 36" deep Sliding Door(s) 
Surgical Instrument Washer Disinfector Surgical Instrument Washer features:
Surgical Instrument Washer load and unload configuration: (select one):
Washer Disinfector front load and unload: pass through load and unload The Washer Disinfector is provided with an unload door and an additional cycle status indicator on the unload end, allowing one-way product flow from the contaminated area to the clean area. Washer Disinfector shall be provided with a combination of rotating jet spray and direct spindle spraying for all treatment solutions. The Washer Disinfector spray system consists of a single rotating spray arm mounted above, and interchangeable spindle wash or a rotating jet spray arms mounted below for internal treatment of the racked items.
Customer Service: 1-509-981-1553 email: Info@yourCEBA.com
Product Support: 1-509-747-5027 email: Temple@yourCEBA.com
Surgical Instrument Washer safety features
Opening the Washer Disinfector load-end door (or unload-end if pass-through unit), automatically stops operation of the washer. The Washer Disinfector door(s) must be closed, alarm acknowledged, and the Cycle Start button depressed to continue operation. A Washer Disinfector Emergency Stop button is provided on the load-end control panel (and unload-end if pass-through unit). If the Washer Disinfector operations of the wash cycle are interrupted by depressing the Button, the operator must reset the button and push the “Cycle Start” button to continue operations from the beginning of the selected cycle.
Contact us for: Surgical Instrument Cleaning Detergents with surgical instrument lubricants, Surgical Instrument Cleaning Detergents, with stainless steel surface conditioners, Surgical Instrument Detergents formulated with four enzyme cleaners, Enzyme Detergent Cleaners, and non-irritating Surgical Instrument Detergents. The research pursuant to the efficacy of surgical instrument cleaning solutions was initiated to deactivate prions deactivating prions within the objective to prevent CJD Creutzfeldt-Jakob Disease. Contact us for product information and pricing. Click Here to go to cleaning surgical instruments prior to sterilization. Contact us for surgical instrument detergents and enzyme surgical instrument detergents.
John Temple Surgical Instrument Enzymatic Cleaners and Washer Disinfectors
Surgical Instrument Washer computer control panel
A Washer Disinfector solid-state microcomputer control system monitors and automatically controls all process operations and functions. A Washer Disinfector twelve-cycle treatment menu may be programmed and retained to permit operating personnel to accommodate a wide variety of loads and processing requirements.  Individual cycle phase times and temperatures and other key process parameters are programmable. Each Washer Disinfector cycle may be locked by supervision to ensure process integrity. The Washer Disinfector Cycle programming may be controlled by a supervisory access code. Each cycle program may be reviewed on demand.
Surgical Instrument Washer automatic treatment cycles
The standard Washer Disinfector treatment cycle consists of any or all of the following phases: Pre-wash, Wash, Rinse, Wash II, Rinse and Final Rinse. All cycle phases may be selected or deselected by the user. All Washer Disinfector Wash and Rinses treatments are re-circulated under pump pressure except the optional non-re-circulated rinse. The cycle, once activated, is completely automatic.
Surgical Instrument Washer debris screens
Located in the Washer Disinfector sump, easily removable screens are provided to protect items and large debris from entering the recirculation system. Washer Disinfector WATER SAVINGS Water from the last rinse cycle may be held and utilized as the pre-wash of the next cycle.
Surgical Instrument Washer Disinfector times and temperatures
Surgical Instrument Washer Disinfector temperature guarantee:
The Washer Disinfector operator may select to guarantee the temperatures for any re-circulated phase of the cycle. If the Washer Disinfector temperature guarantee is selected, the phase will not begin timing until the re-circulated water temperature reaches the set point. If the Washer Disinfector re-circulated temperature drops below the set point during the phase, the timer will stop. Once the Washer Disinfector set point temperature is again met, the phase-timer continues from where it stopped thus assuring the set temperature during entire  treatment phase time.
Surgical Instrument Washer Disinfector operation
The Washer Disinfector operator loads the items to be cleaned in the wash chamber, closes the door, selects the proper cycle, and depresses the Cycle Start button. The Washer Disinfector proceeds through the treatment schedule and automatically shuts off at the completion of the cycle. The Washer Disinfector operator then opens door and removes the cleaned items.
Surgical Instrument Washer Disinfector treatment schedule
Surgical Instrument Washer PRE-WASH
Either Hot water from the house supply fills the Washer Disinfector sump, or Water remaining in the chamber sump from final rinse of the previous cycle is re-circulated through the jet system under pump pressure and pumped to drain upon completion. Phase is adjustable from 0 – 9999 seconds in 1-second intervals and 120F - 190F in 1F intervals.
Surgical Instrument Washer Disinfector detergent wash
Hot water from the house supply fills the Washer Disinfector sump and is pumped through the jet system. As required, a specified amount of detergent is added during recirculation using the OPTIONAL LYNX- supplied, or customer supplied detergent injection pumps. At the end of the treatment, the detergent solution is pumped to drain. Phase is adjustable from 0 to 9999 seconds in 1-second intervals and 120F - 190F in 1F intervals.
Surgical Instrument Washer Disinfector rinse
Hot water from house supply fills the Washer Disinfector chamber sump and is re-circulated through the jet system under pump pressure to remove residual detergent. Re-circulated water is pumped to drain on completion of treatment. Hot water from house supply fills the Washer Disinfector chamber sump and is re-circulated through the jet system under pump pressure to remove residual detergent. Re-circulated water is pumped to drain on completion of the Washer Disinfector treatment.
Surgical Instrument Washer FINAL SANITARY WATER RINSE
The Washer Disinfector Load is sprayed with either re-circulated or an OPTIONAL non-re-circulated sanitary water system. At the end of the Washer Disinfector treatment, the water may be retained in the chamber sump for use as the pre-wash water in the subsequent load or directed down the facility drain. The Washer Disinfector Re-circulated phase is adjustable from 0 – 9999 seconds in 1-second intervals and 120F - 190F in 1F intervals.
Surgical Instrument Washer construction
The Washer Disinfector base, wash chamber and chamber sump are constructed of 304 Stainless Steel. The Washer Disinfector frame and cabinet, door and hardware are # 304 Stainless Steel. The Washer Disinfector is provided with vertical sliding doors. The Washer Disinfector chamber door(s) are of double-wall construction A tempered double-pane, full view glass observation window is provided in each door. The Washer Disinfector is insulated with a moisture resistant protective covering. A modem is provided for online Washer Disinfector service diagnostics, evaluations, and software upgrades. If required by the customer, this system shall allow for immediate access to the unit’s control system by a factory service engineer. The factory trained personnel will have the ability to troubleshoot, identify Washer Disinfector system malfunctions, and recommend repairs to local maintenance personnel within minutes of a malfunction.  A dedicated analog phone line is required to utilize the Washer Disinfector Modem feature. The ideal steris 444 Washer Disinfector replacement with improved operating efficiencies and fits into steris 444 washer footprint size with a larger usable chamber size. This washer disinfector is the ideal steris 444 washer replacement and LYNX 610 LX accessories and racks are interchangeable
Washer Disinfector Surgical Instrument Washer features
Surgical Instrument Washer Disinfector Surgical Instrument Washer accessories
The Washer Disinfector is provided with a stainless steel trim flange to enclose the opening between one end of the washer and the masonry wall opening. A stainless steel modular wall assembly is designed and manufactured to enclose an open wall area or to create a wall barrier. All Washer Disinfector materials and fasteners are of stainless steel construction. A stainless steel transfer cart is provided to connect to the load or unload end of washer for accessories transportation and ease of loading of the washer.

Surgical Instrument Washer
Buy Surgical Instrument Washers that are: made in America, deliver reliable long lasting performance, built with nonproprietary and locally available washer replacement parts.
Surgical Instrument Washer Dimensions
Usable Chamber Size: 26” wide x 26" high x 29" deep
Overall Unit Size: 42" wide x 80" high x 36" deep